Availability: Shipping directly from South korea. Import duties are included.
Estimated Delivery: 21 Days

Part : Aryung Coolant Pump

Model Number : ACP-250HF18

Manufacturer : Aryung

Delivery & Return

Product Description

The ACP-HF series coolant pump is used in machine tools needed higher lift-up than ACP-F type. It has little idle working trouble because of no mechanical seal.

The coolant pump features a compact design and is widely used in general machine tools.

Product Specifications

PumpDischarge volume (/min)2020
Head9 m
In-let & Out-Let3/4" PS
Immersion Depth250 mm
MotorOut-put250 W
FrequencyVoltage50 Hz60 Hz
Weight12 kg

External Dimensions


Performance Range


The liquid should be filled the up and down limit line indicated the pump body side. But that the maximum level of liquid keeps below 20mm from tank top is better. If the liquid is over the maximum limit line, it happens the liquid dispersion. Reversely, the minimum liquid causes noise by air mixing or low performance of sucking particles from under tank. The discharging volume is sharply changeable by the viscosity. If the viscosity is high, the motor increases heat. So the viscosity of cutting oil keeps under 32 cSt. This pump is low head so that it can't discharge due to pipe resistance when the check valve is installed.

250HF 181802511925365134134PS 3/4"
More Information
Product NameAryung Coolant Pump ACP-250HF18
AvailabilityShipping directly from South korea. Import duties are included.
Estimated Delivery21 Days
Shipping For Product300.000000
Calculate ShippingPer Product Quantity
Enable Shipping Per ProductYes
Enable Request a QuoteYes
Write Your Own Review
You're reviewing:Aryung Coolant Pump ACP-250HF18

Please leave a question about the products, our engineer will reply back to you.