SKU
6132ACP400HF3AR
$932.00

Part : Aryung Coolant Pump

Model Number : ACP-400HF18

Manufacturer : Aryung

Delivery & Return

Product Description

The ACP-HF series coolant pump is used in machine tools needed higher lift-up than ACP-F type. It has little idle working trouble because of no mechanical seal.

The coolant pump features a compact design and is widely used in general machine tools.

Product Specifications

Specifications
Type400HF18
PumpDischarge volume (/min)4040
Head10 m
In-let & Out-Let1" PS
Immersion Depth180 mm
MotorOut-put400W
FrequencyVoltage50 Hz60 Hz
Voltage200V/380V/415V200V/380V/445V
Current2.6A/1.50A/1.4A2.7A/1.6A/1.5A
Weight23k

External Dimensions

600HF18

Performance Range

180HF18

The liquid should be filled the up and down limit line indicated the pump body side. But that the maximum level of liquid keeps below 20mm from tank top is better. If the liquid is over the maximum limit line, it happens the liquid dispersion. Reversely, the minimum liquid causes noise by air mixing or low performance of sucking particles from under tank. The discharging volume is sharply changeable by the viscosity. If the viscosity is high, the motor increases heat. So the viscosity of cutting oil keeps under 32 cSt. This pump is low head so that it can't discharge due to pipe resistance when the check valve is installed.

TYPELL1L2L3TLR1R2PE
400HF 181802911020420152146PS 1"
More Information
Shipping For Product0.000000
Calculate ShippingPer Product Quantity
Enable Shipping Per ProductYes
BrandA-Ryung
Enable Request a QuoteNo
Write Your Own Review
You're reviewing:Aryung Coolant Pump ACP-400HF18

Please leave a question about the products, our engineer will reply back to you.

Aryung Coolant Pump ACP-400HF18