Availability: Shipping directly from South korea. Import duties are included
Estimated Delivery: 21 Days
SKU
ATP-420HVB
 

Part : T-ROTOR Oil Pump

Model Number : ATP-420HVB

Manufacturer : A-Ryung Machinery Industries

Delivery & Return

Product Description

  • The ATP-420HVB pump is a large volume discharge pump for transferring both regular oil and Bunker C oil. This pump comes with a relief valve to control pump pressure in order to avoid overloading the motor and pump operation. This pump is used both for machine tools and in the shipping industry.

Overview of the pump

T-ROTOR describes the path followed by a point on a circular plate where it undergoes a rolling contact motion around a fixed circle without slipping. The trajectory created by the outer rolling motion of the disk, beyond its circumference, is known as an Epi-trochoid. The trajectory resulting from the inner rolling motion is referred to as a Hypo-trochoid.

The T-Rotor Pump is an internal gear pump consisting of a pair of internal and external gears manufactured based on the Trochoid Curve.

How it Works 

The T-ROTOR pump operates by creating a chamber of space. The T-ROTOR has a pair of teeth that is designed according to the Trochoid Curve principle, which undergo inward rolling motion. It is a pump that discharges.

The In-Rotor has one fewer gear tooth than the Out-Rotor and rotates eccentrically at a specific distance from the external gear.

The pump is designed to forcibly draw in and discharge fluid by maintaining constant space between the external teeth. The space is constantly large or small. The motion of the rotor is depicted in the image below.

Features of the pump

1. High suction pressure and high mechanical and volumetric efficiency.

2. Because the internal and external gears make rolling contact motion by trochoid curve, the relative speed is lower than that of the gear pump. As a result, there is reduced tooth wear and discharge pulsation.

Because the internal and external gears make rolling contact motion using the trochoid curve, the relative speed is lower than that of the gear pump. As a result, there is reduced wear to the tooth and discharge pulsations are less. 

3. Its straightforward design makes it easy to disassemble, assemble, and repair. In addition, this oil pump is smaller than other gear pumps that share a similar capacity, has a longer service life, and has more discharge per rotation.

4. Unlike gear pumps, the T-Rotor pump does not require a Cresent-Shaped Spacer. It also has various applications in areas such as lubrication, hydraulics, and transportation.

5. Since it always rotates at a single point of contact, the rotation can range from low to high speeds (300 to 3000 RPM).

Product Specifications

Data preparation in “Table” is based on fluid VG46, and when using a fluid with a higher viscosity than this, the power must be properly increased.

Specifications
TypeATP-420HVB
cm³/rev90
Discharge Volume1,000 rpm90
1,800 rpm162
Max Pressure0.5 Mpa
Permissive Rotation1800 rpm
Net WeightHVB44 kg
HVB44 kg

ApplicationMaterial

Fluid used : Oil

Viscosity (at 40℃) :

- 400cSt : 1800rpm
- 500cSt : 1500rpm
- 1000cSt : 1200rpm Below

Operating temperature : 0℃ ~ 180℃ Below

Pump body : Cast iron
Port housing : Cast iron
Pump cover : Cast iron
Bearing : #6208zz, 6207zz
Shaft : Steel
Rotor : Powder steel
Oil-seal : FKM (Ø40×Ø62×11t)
O-Ring : NBR
Relief valve : Cast iron etc.

External Dimensions

A-Ryung T-ROTOR Oil Pump ATP-420HVB external dimension diagram

Example System Assembly

An example diagram of system assembly for the A-Ryung ATP-420HVB t-rotor oil pump

More Information
AvailabilityShipping directly from South korea. Import duties are included
Estimated Delivery21 Days
Shipping For Product150.000000
Calculate ShippingPer Product Quantity
Enable Shipping Per ProductYes
BrandA-Ryung
Enable Request a QuoteYes
Write Your Own Review
You're reviewing:A-Ryung T-ROTOR Oil Pump ATP-420HVB

Please leave a question about the products, our engineer will reply back to you.