Availability: Shipping directly from South korea. Import duties are included.
Estimated Delivery: 21 Days

Part : Aryung Coolant Pump

Manufacturer Model Number : ACP-100HF 120

Manufacturer : Aryung

Delivery & Return

Product Description

ACP-FS serise is used in machine tools needed higher lift-up than ACP-F type. lt has Little idle working trouble because of no mechanical seal. lt is compact design and widely used in general machine tools.

The decreasing suction friction and high efficiency is improved by setting inlet bottom.

Product Specifications

Type100FS 120
PumpDischarge volume (/min)3545
Head2 m
In-let & Out-Let3/8" PS
Immersion Depth120 mm
MotorOut-put100 W
FrequencyVoltage50 Hz60 Hz
Weight6 kg

External Dimensions

ACP-400FS 250

Performance Range

ACP-100FS 120

The liquid should be filled the up and down limit line indicated the pump body side. But that the maximum level of liquid keeps below 20mm from tank top is better. If the liquid is over the maximum limit line, it happens the liquid dispersion. Reversely, the minimum liquid causes noise by air mixing or low performance of sucking particles from under tank. The discharging volume is sharply changeable by the viscosity. If the viscosity is high, the motor increases heat. So the viscosity of cutting oil keeps under 32 cSt. This pump is low head so that it can't discharge due to pipe resistance when the check valve is installed.

100FS 1201201970202829090PS 3/8"
More Information
AvailabilityShipping directly from South korea. Import duties are included.
Estimated Delivery21 Days
Shipping For Product300.000000
Calculate ShippingPer Product Quantity
Enable Shipping Per ProductYes
Enable Request a QuoteYes
Write Your Own Review
You're reviewing:Aryung Coolant Pump ACP-100FS 120

Please leave a question about the products, our engineer will reply back to you.